Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and Upvc window Repair doors is essential. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double glazed window repairs-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is large, you might prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc Window Repair is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it could be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. You'll first need to close the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with the breeze. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical part hinges will wear out over time. It's easy to change the hinges on a window repair but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give assistance.

It is also essential to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically fabric tubes filled with some type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security for upvc window repair your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come the point when it's more economical to replace them than repair them. If you encounter any issues with your upvc window you should consult a professional as soon as possible.